Our E-Z-TYֿ® Double OT Clamps can be used to make a loop just like our regular E-Z-TYֿ® Rope Clamps, but it can be used on a double rope or a single rope. It also gives you added strength when you need it. The more double OT clamps you use, the stronger your application. It can also be used to adjoin two ropes together!
For optimal strength, it is recommended to distance the E-Z-TYֿ® Double OT clamps at least 4 inches apart, not to exceed 8 inches apart. The working load limit is as follows: 3/8" clamp wll = 160 lbs 1/2" clamp wll = 400 lbs 5/8" clamp wll = 500 lbs 3/4" clamp wll = 1,100 lbs
Testing for working load limit was done in house and was performed on new double-braided nylon rope. The working load limits can vary dependent upon the age, shape, and type of rope you use.
Disclaimer of Consequential Damages
TMB Distributors, LLC. is not responsible for damage and/or injury in whole or in part by failure of any apparatus with which the E-Z-TYֿ® system is used, careless or improper use of the system, unauthorized repair and/or modification, use of visible neglected, deteriorated system components, or unreasonable use. TMB Distributors, LLC. is not responsible for incidental or consequential damages with respect to economic loss or injury to persons or property whether as a result of breached of expressed or implied warranty, negligence, misuse, accidents of otherwise. The E-Z-TYֿ® system should not be used for mountain climbing, with life saving equipment, in rigging to support loads over people occupied areas, or in any application to secure human life or valuable cargo.
|